Order Products : sales@su-jiao.com
S&E PVC GA-1006
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | S&E Specialty Polymers, LLC |
| Trademark: | S&E PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DHwLpC_S-E-PVC-GA-1006.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| S & E PVC GA-1006 is a polyvinyl chloride product,. It is available in North America. Typical application areas are: wire and cable. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 91 | ASTM D2240 | |
| Shaw A, 15 seconds | 86 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 9.65 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 16.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -25.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.2E+13 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 24 | % | ASTM D2863 |
| Additional Information |
|---|
| Suggested Stock Temperature: 360°FTemperature Rating: 60°CMin. Wall Thickness: 0.03 inches |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® H3CF | BASF Leuna GmbH | Nylon 6 | Miramid® |
| Tisoplen® PPH 30 GFR | Tisan | PP Homopolymer | Tisoplen® |
| Europrene® SOL T 6320 | Versalis S.p.A. | SBS | Europrene® |
| Flontech® FT-M01-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| HANWHA LDPE 5318 | Hanwha Chemical | LDPE | HANWHA LDPE |
