Order Products : sales@su-jiao.com
Generic TPU-Polyether - Barium Sulfate
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DHVgqh_Generic-TPU-Polyether---Barium-Sulfate.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TPU-Polyether - Barium Sulfate This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 to 1.35 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.4 to 7.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 0.80 to 0.81 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 55 to 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 5.52 to 23.5 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain, 23°C | 3.45 to 12.1 | MPa | |
| 300% Strain, 23°C | 8.96 to 38.6 | MPa | |
| Tensile Strength (Break, 23°C) | 30.3 to 48.3 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 300 to 550 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 GF 33 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Victron® 095G4 | Asia International Enterprise (Hong Kong) Limited | PEEK | Victron® |
| NuSil MED-2955 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| LEXAN™ HPH4404 resin | SABIC Innovative Plastics | PC+PPC | LEXAN™ |
| KMI PP KM-503IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
