Order Products : sales@su-jiao.com
RTP 4005A SI 2
| Category: | PPA , Polyphthalamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DGFLdK_RTP-4005A-SI-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.40 to 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 125 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 11000 | MPa | ASTM D638 |
| Tensile Strength | 169 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.8 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 10300 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 262 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 490 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 277 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 316 to 338 | °C | |
| Middle Temperature | 316 to 338 | °C | |
| Front Temperature | 316 to 338 | °C | |
| Mold Temperature | 66.0 to 163 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex A00200FN | Ginar Technology Co., LTD. | Nylon 66 | Mapex |
| RTP 200 AR 10 GB 10 | RTP Company | Nylon 66 | RTP |
| RTP 2099 X 115387 A | RTP Company | Nylon, Unspecified | RTP |
| FHR Polypropylene P4G3Z-050 | Flint Hills Resources, LP | PP Homopolymer | FHR Polypropylene |
| INTEGRATE™ NP507030 | LyondellBasell Industries | Polyolefin, Unspecified | INTEGRATE™ |
