Order Products : sales@su-jiao.com
Moplen HP653P
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DEi7NP_Moplen-HP653P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen HP653P is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP653P is a homopolymer typically used in heavy denier BCF and CF multi-filament. Moplen HP653P resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 17 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 37.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1570 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 106 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Desmovit® DP R 9920 | geba Kunststoffcompounds GmbH | TPU-Ester/Ether | Desmovit® |
| Kotex K-20MRA | Kotec Corporation | PC | Kotex |
| Hysol® MG33F-0588 | Loctite® | Epoxy | Hysol® |
| LUVOCOM® 20-0778 schwarz | Lehmann & Voss & Co. | PPA | LUVOCOM® |
| 3M™ Dyneon™ PTFE Compound PDR 09001 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
