HiFill® PA6/6 GF13 IM2 HS L

Category: Nylon 66 , Polyamide 66
Manufacturer: Techmer Engineered Solutions
Trademark: HiFill®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: DEVfrZ_HiFill-PA6-6-GF13-IM2-HS-L.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
HiFill®PA6/6 GF13 IM2 HS L is a polyamide 66 (nylon 66) product, which contains a 13% glass fiber reinforced material. It can be processed by injection molding and is available in North America.

Features include:
  • flame retardant/rated flame
  • Impact modification
  • Impact resistance
  • heat stabilizer
  • Lubrication
General Information
Filler / Reinforcement
  • Glass fiber reinforced material, 13% filler by weight
Additive
  • Impact modifier
  • heat stabilizer
  • Lubricant
Features
  • Impact resistance, high
  • Thermal Stability
  • Lubrication
Appearance
  • Available colors
Forms
  • Particle
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.19g/cm³ASTM D792
Molding Shrinkage - Flow (3.18 mm)0.50%ASTM D955
Water Absorption (24 hr)1.1%ASTM D570
HardnessNominal ValueUnitTest Method
Rockwell Hardness (R-Scale)111ASTM D785
MechanicalNominal ValueUnitTest Method
Tensile Strength (Break)91.7MPaASTM D638
Tensile Elongation (Break)4.4%ASTM D638
Flexural Modulus 3790MPaASTM D790
Flexural Strength 125MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact ASTM D256
    -40°C, 3.18 mm 110J/mASTM D256
    23°C, 3.18 mm 170J/mASTM D256
Unnotched Izod Impact (3.18 mm)No BreakASTM D256
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load ASTM D648
    0.45 MPa, not annealed 249°CASTM D648
    1.8 MPa, not annealed 221°CASTM D648
Melting Temperature 254°C
CLTE - Flow 5.4E-5cm/cm/°CASTM D696
ElectricalNominal ValueUnitTest Method
Volume Resistivity 1.0E+14ohms·cmASTM D257
Dielectric Strength 119kV/mmASTM D149
FlammabilityNominal ValueUnitTest Method
Flame Rating HBUL 94
InjectionNominal ValueUnit
Drying Temperature 82.2°C
Drying Time 2.0 - 4.0hr
Suggested Max Moisture 0.10%
Rear Temperature 282 - 293°C
Middle Temperature 288 - 299°C
Front Temperature 277 - 288°C
Nozzle Temperature 271 - 304°C
Processing (Melt) Temp 282 - 304°C
Mold Temperature 79.4 - 104°C
Injection Rate Slow-Moderate
Back Pressure 0.00 - 0.345MPa
Injection instructions
Screw Speed: SlowRecommendations for Molding and Tool Conditions: Well vented moldMoisture Content, as received: Product is packaged at 0.2% or less.
Note Message
1 .Method A (short time)
Resin Grade Manufacturer Category Trademark
RTP 4200 TFE 20 RTP Company PI, TP RTP
SWANCOR CHEMPULSE 901 SWANCOR IND. CO., LTD. Epoxy SWANCOR CHEMPULSE
Borealis PP MG302AI Borealis AG PP, Unspecified Borealis PP
Arak LLDPE HD5218EA Shazand (Arak) Petrochemical Corporation HDPE Arak LLDPE
Ebalta MG 321 FR / Comp. A+B Ebalta Kunststoff GmbH PUR, Unspecified Ebalta