Order Products : sales@su-jiao.com
POLIMAXX GM2860
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | IRPC Public Company Limited |
| Trademark: | POLIMAXX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DCGc0u_POLIMAXX-GM2860.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GM2860 is a High Density Polyethylene resin for blow molding with high impact strength, high stiffness. It is suitable for container a few ml to 20 liters, lubricant or cosmetic bottle, chemical container, one-way bottle. It also meets the F.D.A. requirement in the code of federal regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.35 | g/10 min | |
| 190°C/5.0 kg | 1.5 | g/10 min | |
| Environmental Stress-Cracking Resistance (F50) | 85.0 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 66 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 31.5 | MPa | |
| Break | 36.5 | MPa | |
| Tensile Elongation (Break) | 2100 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 8.5 | kJ/m² | DIN 53453 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 130 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 HT 7500 GF 40 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Niuk 40RN00 | Shanghai Niuk New Plastic Technology Co., Ltd. | Nylon 6 | Niuk |
| Escorene™ Ultra UL 7720 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| HIPEX® HX8ICN (Series: HTR/OR) | KRAIBURG TPE | TPE | HIPEX® |
| LUVOCOM® 1-8152-2 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
