Order Products : sales@su-jiao.com
FLEXITEQ™ F60A571
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DAg0wl_FLEXITEQ-F60A571.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FLEXITEQ™ F60A571 is a flame retardant thermoplastic vulcanisate material based on Santoprene rubber technology. It has excellent flame retardant properties, designed to meet the requirements of AS1530.2 for Window Glazing Applications while retaining the usual benefits of Santoprene thermoplastic rubbers, soft touch, excellent compression set and sealing properties. FLEXITEQ™ F60A571 is supplied in black and maintains excellent UV performance in outdoor applications. FLEXITEQ™ F60A571 is ROHS compliant. Note: The letters "UV" or "W" indicate additional UV stabilisation [ ie: FLEXITEQ™ F60A571UV ]. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 2.00 | MPa | ASTM D412 |
| Tensile Strength 2(Break) | 4.00 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 250 | % | ASTM D412 |
| Tear Strength 4(23°C) | 25.0 | kN/m | ASTM D624 |
| Compression Set 5(23°C, 70 hr) | 28 | % | ASTM D395B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flammability Index (1.80 mm) | 3.00 | AS 1530.2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 to 80.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 160 to 190 | °C | |
| Middle Temperature | 180 to 200 | °C | |
| Front Temperature | 180 to 200 | °C | |
| Processing (Melt) Temp | 180 to 200 | °C | |
| Mold Temperature | 50.0 to 80.0 | °C | |
| Injection Pressure | 60.0 to 140 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.300 to 0.700 | MPa | |
| Screw Speed | 50 to 100 | rpm |
| Note Message | |
|---|---|
| 1 . | Die C, 500 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | Die C, 500 mm/min |
| 4 . | Die C, 500 mm/min |
| 5 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LAF423B | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| TUFNYL® SGF 30 BLUE | SRF Ltd. | Nylon 6 | TUFNYL® |
| Lucky Enpla LKG | Lucky Enpla Co LTD | ABS | Lucky Enpla |
| Polifil® Nylon 78MRGF | The Plastics Group | Nylon 66 | Polifil® Nylon |
| Durethan® BC 304 H3.0 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
