Order Products : sales@su-jiao.com
THERMOLAST® K TP6LDZ (Series: UV/LD/b)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® K |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | DAXa2U_THERMOLAST-K-TP6LDZ-Series-UV-LD-b-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The UV/LD/b Series is your material solution for applications requiring high UV resistance. It is particularly appropriate for automotive exterior. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 63 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 9.50 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 750 | % | ISO 37 |
| Tear Strength 3 | 18 | kN/m | ISO 34-1 |
| Compression Set 4 | ISO 815 | ||
| 23°C, 72 hr | 27 | % | |
| 70°C, 24 hr | 40 | % | |
| 100°C, 24 hr | 55 | % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Die Temperature | 200 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method Bb, Angle (Nicked) |
| 4 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® SA-3691 | Guangdong Silver Age Sci & Tech. Co., Ltd | TPE | SILVER® |
| Adell Polyamide BA-36 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| FHR Polypropylene P6G2N-095 | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
| KIBITON® Q-Resin PB-5903 | CHI MEI CORPORATION | SBC | KIBITON® Q-Resin |
| Plexiglas® Satinice df23 8N | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
