Order Products : sales@su-jiao.com
Pebax® 3533 SP 01
| Category: | PEBA-Ether , Polyether Block Amide |
| Manufacturer: | Arkema |
| Trademark: | Pebax® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D9s8Lb_Pebax-3533-SP-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyether block amide PEBAX® 3533 SP 01 is a thermoplstic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 24 hr, 4.00 mm | 0.80 | % | |
| Flow : 24 hr, 4.00 mm | 0.50 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 1.2 | % | |
| Equilibrium, 23°C, 50% RH | 0.40 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A | 82 | ||
| Shore A, 15 sec | 80 | ||
| Shore D | 33 | ||
| Shore D, 15 sec | 25 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 39.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 600 | % | ISO 527-2 |
| Flexural Modulus | 21.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break | ||
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 77.0 | °C | ISO 306 |
| Melting Temperature | 144 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 55.0 to 65.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Processing (Melt) Temp | 180 to 260 | °C | |
| Mold Temperature | 10.0 to 30.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 55.0 to 65.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Melt Temperature | 190 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Mold at 40°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® 46GB012 | Reliance Industries Limited | HDPE | RELENE® |
| Starflam PZ0052E | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| Sylvin 8658-65FU White 1357 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Hipolyene 3040 B (M) | Zylog Plastalloys | TPO (POE) | Hipolyene |
| LG SBS LG-411 | LG Chem Ltd. | SBS | LG SBS |
