Order Products : sales@su-jiao.com
Monprene® OM-10255
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D9VrOC_Monprene-OM-10255.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Monprene OM-10255 is designed for overmolding applications like grips and anti-skid parts for consumer products. Monprene OM-10255 is a natural-colored grade that exhibits excellent adhesion to PC, ABS, and PC/ABS. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.998 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 15 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 1 second, injection molding 1 | 45 | ASTM D2240 | |
| Shore A, 5 seconds, injection molding 2 | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| Transverse flow : 100% strain 3 | 1.48 | MPa | ASTM D412 |
| Flow : 100% strain 4 | 1.65 | MPa | ASTM D412 |
| Transverse flow : 300% strain 5 | 2.90 | MPa | ASTM D412 |
| Flow : 300% strain 6 | 3.27 | MPa | ASTM D412 |
| Tensile Strength 7 | ASTM D412 | ||
| Transverse flow : Fracture | 5.67 | MPa | ASTM D412 |
| Flow : Fracture | 5.87 | MPa | ASTM D412 |
| Tensile Elongation 8 | ASTM D412 | ||
| Transverse flow : Fracture | 550 | % | ASTM D412 |
| Flow : Fracture | 540 | % | ASTM D412 |
| Compression Set 9 | ASTM D395B | ||
| 23°C, 22 hr | 42 | % | ASTM D395B |
| 70°C, 22 hr | 91 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| RTI Elec | 50.0 | °C | UL 746 |
| RTI Imp | 50.0 | °C | UL 746 |
| RTI | 50.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.00 to 1.20mm, All Colors) | HB | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Adhesion Strength - Cohesive Failure | 51 | N | |
| Adhesion to ABS | |||
| Adhesion to PC | |||
| Adhesion to PC/ABS |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 138 - 188 | °C | |
| Middle Temperature | 154 - 199 | °C | |
| Front Temperature | 154 - 216 | °C | |
| Nozzle Temperature | 154 - 221 | °C | |
| Processing (Melt) Temp | 166 - 221 | °C | |
| Mold Temperature | 10.0 - 32.2 | °C | |
| Injection Pressure | 1.38 - 5.52 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.172 - 0.862 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| Moisture can degrade the material. Drying is suggested. This can be accomplished by placing the material in a desiccant dryer for 2 to 4 hours at140°F. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 138 - 149 | °C | |
| Cylinder Zone 2 Temp. | 149 - 160 | °C | |
| Cylinder Zone 3 Temp. | 160 - 182 | °C | |
| Cylinder Zone 5 Temp. | 160 - 182 | °C | |
| Die Temperature | 160 - 182 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 30 to 100 rpm |
| Note Message | |
|---|---|
| 1 . | Aging 0 hr at 23°C |
| 2 . | Aging 48 hr at 23°C |
| 3 . | Mouth die C, 510mm/min |
| 4 . | Mouth die C, 510mm/min |
| 5 . | C mold, 510mm/min |
| 6 . | C mold, 510mm/min |
| 7 . | C mold, 510mm/min |
| 8 . | Mouth die C, 510mm/min |
| 9 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXUS PC PC1510R | Nexus Resin Group, LLC. | PC | NEXUS PC |
| Durethan® BM 430 H2.0 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
| EchoShield 0512 | DN Plastics | TPO (POE) | EchoShield |
| Ebalta MG 453 GF / Comp. A+B | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| Karina WHITE PVC COMPOUND -E 807-10/203-F-IS | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
