Order Products : sales@su-jiao.com
DAI-EL™ G-7210BP
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D7hQIx_DAI-EL-G-7210BP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL G-7210BP is a bisphenol curable, gum copolymer. It is designed especially for injection molding of seals. Properly compounded, DAI-EL G-7210BP produces vulcanizates with excellent heat and compression set resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | |
| Mooney Viscosity (ML 1+10, 121°C) | 28 | MU | |
| Fluorine Content | 66 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Brittleness - TR10 | -18 | °C | ASTM D1329 |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | |||
| Shore A 1 | 76 | ||
| Shore A 2 | 75 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% Strain, 25°C 3 | 5.40 | MPa | |
| 100% Strain, 25°C 4 | 5.50 | MPa | |
| Tensile Strength | |||
| Yield, 25°C 5 | 13.0 | MPa | |
| Yield, 25°C 6 | 12.5 | MPa | |
| Tensile Elongation | |||
| Break, 25°C 7 | 210 | % | |
| Break, 25°C 8 | 220 | % | |
| Compression Set | ASTM D395B | ||
| 200°C, 70 hr 9 | 18 | % | |
| 200°C, 70 hr 10 | 19 | % |
| Note Message | |
|---|---|
| 1 . | ODR, Strain: 3°, Test time: 12 min |
| 2 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 3 . | ODR, Strain: 3°, Test time: 12 min |
| 4 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 5 . | ODR, Strain: 3°, Test time: 12 min |
| 6 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 7 . | ODR, Strain: 3°, Test time: 12 min |
| 8 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 9 . | MDR 2000, Strain: 0.5°, Test time: 6 min |
| 10 . | ODR, Strain: 3°, Test time: 12 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP 83EK10 | Saudi Basic Industries Corporation (SABIC) | PP Impact Copolymer | SABIC® PP |
| Tru-Bond™ PB Gel | Devcon | Acrylic, Unspecified | Tru-Bond™ |
| Nilac AE/V0 | Soredi S.p.a. | ABS | Nilac |
| Di-Pak™ R-4525/40 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| Jampilen EP540N | Jam Polypropylene Company | PP Copolymer | Jampilen |
