Order Products : sales@su-jiao.com

Miramid® SB30C

Category:	Nylon 66 , Polyamide 66
Manufacturer:	BASF Leuna GmbH
Trademark:	Miramid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	D5K0Ky_Miramid-SB30C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Miramid® SB30C is a Polyamide 66 (Nylon 66) material filled with 30% glass bead. It is available in Europe for injection molding.

Important attributes of Miramid® SB30C are:

Chemical Resistant

Crystalline

Good Aesthetics

Good Dimensional Stability

Good Stiffness

Typical applications include:

Automotive

Engineering/Industrial Parts

Housings

General Information
Filler / Reinforcement	Glass Bead, 30% Filler by Weight
Additive	Mold Release
Features	Crystalline Fuel Resistant Good Dimensional Stability Good Flow Good Stiffness Good Surface Finish Grease Resistant Low Warpage Oil Resistant Solvent Resistant
Uses	Automotive Under the Hood Engineering Parts Housings
Forms	Granules
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)

Physical	Dry	Conditioned	Unit	Test Method
Density	1360	--	kg/m³	ISO 1183 ¹
Water Absorption				ISO 62 ²
Saturation	6.3	--	%
Equilibrium	2.1	--	%
Viscosity number	145	--	cm³/g	ISO 307, 1157, 1628 ³

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	4500	2300	MPa	ISO 527-2 ⁴
Tensile Stress (Break)	80.0	50.0	MPa	ISO 527-2 ⁵
Tensile Strain (Break)	3.0	20	%	ISO 527-2 ⁶
Flexural Stress ⁷	140	--	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength				ISO 179/1eA ⁸
-30°C	3.00	--	kJ/m²
23°C	4.00	8.00	kJ/m²
Charpy impact strength				ISO 179/1eU ⁹
-30°C	25.0	--	kJ/m²
23°C	25.0 kJ/m²	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa)	120	--	°C	ISO 75-2 ¹⁰
Melting Temperature (DSC)	260	--	°C	ISO 3146

Electrical	Dry	Conditioned	Unit	Test Method
Volume resistivity	1.0E+13	1.0E+10	ohms·m	IEC 60093 ¹¹
Dielectric Constant (1 MHz)	3.50	--		IEC 60250
Comparative tracking index	550	--		IEC 60112 ¹²

Injection	Dry	Unit
Processing (Melt) Temp	260 to 290	°C
Mold Temperature	80.0 to 100	°C

Note Message
1 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
4 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
6 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .	Typical values for uncoloured product at 23°C and 50% relative humidity
8 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
9 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
11 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
12 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Resin Grade	Manufacturer	Category	Trademark
RTP 285 F	RTP Company	Nylon 12	RTP
NEFTEKHIM PE 6438R	Nizhnekamskneftekhim Inc.	MDPE	NEFTEKHIM PE
NYCOA Polyamide 5013 HS	Nycoa (Nylon Corporation of America)	Nylon 66	NYCOA Polyamide
GERMAMID 6.6 GF 30	Kunststoff-Kontor-Hamburg GmbH	Nylon 66	GERMAMID
ESENTTIA 05C06	Polipropileno del Caribe S.A.	PP Impact Copolymer	ESENTTIA