| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | Vamp Tech |
| Trademark: | DELOXEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D4Orvr_DELOXEN-3010.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| PPO, 30% glass fiber reinforced, not Flame Retardant compound, good mechanical properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 | % | ASTM D955 |
| Water Absorption (Saturation) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7500 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 90.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.7 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 6.0 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 20 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 140 | °C | ASTM D1525 1 |
| RTI Elec | 110 | °C | UL 746 |
| RTI Imp | 110 | °C | UL 746 |
| RTI Str | 110 | °C | UL 746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 290 | °C | |
| Mold Temperature | 90.0 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Titacon® MS902 | Titan Plastics Compounds Co., Ltd. | Acetal (POM) Copolymer | Titacon® |
| En Chuan 6021H | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
| Hostalen GC 7260 LS | LyondellBasell Industries | HDPE | Hostalen |
| LOXIM 600 00 HB | LOXIM Industries Private Limited | PC+PBT | LOXIM |
| Keyflex® BT GN 7142F | LG Chem Ltd. | TPC-ET | Keyflex® BT |