Order Products : sales@su-jiao.com
Pebax® 4533 SA 01
| Category: | PEBA-Ether , Polyether Block Amide |
| Manufacturer: | Arkema |
| Trademark: | Pebax® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D4GvpB_Pebax-4533-SA-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyether block amide Pebax® 4533 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.01 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 24 hr, 4.00 mm | 1.1 | % | |
| Flow : 24 hr, 4.00 mm | 0.40 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 1.2 | % | |
| Equilibrium, 23°C, 50% RH | 0.40 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A | 92 | ||
| Shore A, 15 sec | 90 | ||
| Shore D | 46 | ||
| Shore D, 15 sec | 41 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 42.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 550 | % | ISO 527-2 |
| Flexural Modulus | 86.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break | ||
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 111 | °C | ISO 306/A |
| Melting Temperature | 147 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 70.0 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Processing (Melt) Temp | 200 to 270 | °C | |
| Mold Temperature | 10.0 to 30.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 70.0 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Melt Temperature | 210 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | 40°C Mold |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BMNO P10 | Arkema | Nylon 11 | Rilsan® |
| Delta N6-100 | Delta Polymers | Nylon 6 | Delta |
| ELASTOSIL® R 756/70 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
| Jam PE 41X01 | Jam Petrochemical Company | HDPE | Jam PE |
| Sylvin 4200-95 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
