Order Products : sales@su-jiao.com
OXNILON 66 ST 33GF
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Oxford Polymers |
| Trademark: | OXNILON 66 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D39fGn_OXNILON-66-ST-33GF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
OXNILON 66 ST 33GF is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in North America for injection molding. Important attributes of OXNILON 66 ST 33GF are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.30 | % | ASTM D955 |
| Water Absorption (Saturation) | 5.5 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 134 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.0 | % | ASTM D638 |
| Flexural Modulus | 6890 | MPa | ASTM D790 |
| Flexural Strength | 186 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 200 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 250 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 271 to 293 | °C | |
| Middle Temperature | 282 to 304 | °C | |
| Front Temperature | 293 to 316 | °C | |
| Nozzle Temperature | 291 to 313 | °C | |
| Processing (Melt) Temp | 293 to 316 | °C | |
| Mold Temperature | 43.3 to 104 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zytel® LC6601 NC010 | DuPont Performance Polymers | Nylon 612 | Zytel® |
| Generic LLDPE | Generic | LLDPE | Generic |
| PENTAMID B GV40 E H schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
| Lifoflex® UV FLAM 80600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
| Durethan® BC 700 HTS DUSXBL 900116 | LANXESS GmbH | Nylon 6 | Durethan® |
