Order Products : sales@su-jiao.com

PPO™ 646 resin

Category:	PPE+PS , Polyphenylene Ether + PS
Manufacturer:	SABIC Innovative Plastics
Trademark:	PPO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	D2wsDP_PPO646resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PPO* 646 resin is a high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC.

Message

PPO* 646 resin is a high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC.

General Information
Features	High molecular weight Hydrolysis stability
Uses	Additive
Agency Ratings	FDA 21 CFR 177.2460 European 2002/72/EC
RoHS Compliance	RoHS compliance
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Density ¹	0.465	g/cm³	ISO 1183
D	3.20		Internal method
Mean Particle Size	200.0	µm	Internal method
Mn	21700		Internal method
Mw	68600		Internal method
Phenolic End-group Content	820	ppm	Internal method
Tg (half width)	217	°C	Internal method
Intrinsic Viscosity	0.46	dl/g	Internal method

Additional Information	Nominal Value	Unit	Test Method
Toluene Content		ppm	Internal method

Note Message
1 .	Bulk Density

Resin Grade	Manufacturer	Category	Trademark
Synthos EPS® 2040F/CZ	Synthos S.A.	PS (EPS)	Synthos EPS®
TOTAL Polypropylene PPH 7059	TOTAL Refining & Chemicals	PP Homopolymer	TOTAL Polypropylene
Exelene® PP C3504	Montachem International, Inc.	PP Impact Copolymer	Exelene® PP
POLYFLAM® RPP 4000 E	A. Schulman Europe	PP Homopolymer	POLYFLAM®
Sylvin 4200-68 Clear 8468	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin