Order Products : sales@su-jiao.com
NANCAR® 4580
| Category: | NBR , Acrylonitrile Butadiene Rubber |
| Manufacturer: | Nantex Industry Co., Ltd. |
| Trademark: | NANCAR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | D19dtT_NANCAR-4580.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NANCAR® 4580 is a high acrylonitrile butadiene copolymer with excellent oil resistance. It is polymerized at low temperature and contains sufficient antioxidant for normal aging conditions. It has fast curing rate, low mold fouling and superior resilience properties. It has good processing characteristics in compounds where flow and knitting are desired and is especially valuable in high durometer compounds. NANCAR® 4580 provides good processing and building tack. It is suggested for use in molded goods, friction stock and similar applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.00 | g/cm³ | |
| Mooney Viscosity | ASTM D1646 | ||
| ML 1+4, 100°C 1 | 90 | MU | |
| ML 1+4, 100°C | 80 | MU | |
| Acrylonitrile Content - Bound | 44.5 | % | Internal Method |
| Solubility - in MEK | 100 | % | |
| Stabilizer | Non-staining |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Loss | 0.30 | % | ASTM D5688 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 5 sec 2 | 77 | ||
| Shore A, 5 sec 3 | 76 | ||
| Shore A, 5 sec 4 | 75 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 300% Strain 5 | 16.0 | MPa | |
| 300% Strain 6 | 14.8 | MPa | |
| 300% Strain 7 | 12.2 | MPa | |
| Tensile Strength | ASTM D412 | ||
| Yield 8 | 28.0 | MPa | |
| Yield 9 | 26.5 | MPa | |
| Yield 10 | 27.7 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Break 11 | 450 | % | |
| Break 12 | 460 | % | |
| Break 13 | 540 | % | |
| Tear Strength | 60.0 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | Uncured |
| 2 . | CURED @150°C for 60 mins |
| 3 . | CURED @150°C for 40 mins |
| 4 . | CURED @150°C for 20 mins |
| 5 . | CURED @150°C for 60 mins |
| 6 . | CURED @150°C for 40 mins |
| 7 . | CURED @150°C for 20 mins |
| 8 . | CURED @150°C for 60 mins |
| 9 . | CURED @150°C for 40 mins |
| 10 . | CURED @150°C for 20 mins |
| 11 . | CURED @150°C for 60 mins |
| 12 . | CURED @150°C for 40 mins |
| 13 . | CURED @150°C for 20 mins |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NILSAN S V0 NB L | Taro Plast S.p.A. | ABS | NILSAN |
| Akulon® Ultraflow K-FKGV4 /A | DSM Engineering Plastics | Nylon 6 | Akulon® Ultraflow |
| ALCOM® PC 740/4 UV WT1240-10LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Ferro PP NPP00GX06NA | Ferro Corporation | PP Copolymer | Ferro PP |
| Promyde® B30 P2 G15 | NUREL, S.A. | Nylon 6 | Promyde® |
