Order Products : sales@su-jiao.com
Shinko-Lac® ASA TW15
| Category: | ASA , Acrylonitrile Styrene Acrylate |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CzsyCS_Shinko-Lac-ASA-TW15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Shinko-Lac® ASA TW15 is an Acrylonitrile Styrene Acrylate (ASA) material. It is available in North America for injection molding. Important attributes of Shinko-Lac® ASA TW15 are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/5.0 kg) | 0.30 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 99 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 41.2 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2060 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 60.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 160 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm, Injection Molded | 106 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm, Injection Molded | 93.0 | °C | |
| Vicat Softening Temperature | 107 | °C | ISO 306/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melos™ FM 0434/7 | Melos GmbH | EPM | Melos™ |
| Tenac™-C 4520 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| TechnoMid PA6 S GF 15 | TechnoCompound GmbH | Nylon 6 | TechnoMid |
| LNP™ STAT-KON™ RE004 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ STAT-KON™ |
| LEXAN™ CFR7630 resin | SABIC Innovative Plastics | PC | LEXAN™ |
