Order Products : sales@su-jiao.com
NuSil MED-6210
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Cy8xbw_NuSil-MED-6210.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: 1.43 R.I., OPTICALLY CLEAR |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Optical | Nominal Value | ||
|---|---|---|---|
| Refractive Index | 1.430 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.05 | g/cm³ | |
| Viscosity | |||
| -- 1 | 13 | Pa·s | |
| -- 2 | 19 | Pa·s | |
| Curing Time (150°C) | 0.50 | hr | |
| Pot Life (25°C) | 210 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 45 | ||
| Tensile Strength | 6.21 | MPa | |
| Tensile Elongation at Break | 140 | % | |
| Tear Strength | 5.25 | kN/m |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SITRALAC 8E GF20 / C01000 nature | SITRAPLAS GmbH | ABS | SITRALAC |
| FHR Polypropylene AP5155-HA | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
| Geon™ Vinyl Flexible B4D01 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| HIPOL™ J840 | Mitsui Chemicals, Inc. | PP Impact Copolymer | HIPOL™ |
| Hypro® PPC-CC30 NATURAL | Entec Polymers | PP Copolymer | Hypro® |
