Order Products : sales@su-jiao.com

Silopren® LSR 2671

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Silopren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CxBcKK_Silopren-LSR-2671.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Silopren LSR 2671 TP 3733 is a two-component liquid silicone rubber for injection moulding processes.Silopren LSR 2671 TP 3733 shows in comparison to Silopren LSR 2670 as non post-cure grade (NPC grade)a lower compression set after vulcanisation.

Key Features and Benefits
Vulcanisates consisting of Silopren LSR 2671 TP 3733 are distinguished by the following properties:

non post-cure

high reactivity

excellent thermal stability

high stability and flexibility at low temperatures

good rubber-like properties, high tear resistance

long service life at dynamic stress

high stability to ozone and ultraviolet light

outstanding resistance to ageing,

excellent dielectric behaviour over a wide range of temperatures,

not readily combustible, does not melt or drip

easy pigmentable with the LSR Colour Pastes

Potential Applications
Because of the outstanding properties Silopren LSR 2671 TP 3733 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, stoppers, diaphragms, keypads, bellows,vibration dampers, switch cover, spark plug boots, cable connectors s.o.

General Information
Features	Good Colorability Good Stability Good Tear Strength Good Thermal Stability Good UV Resistance High Reactivity Low Temperature Flexibility Ozone Resistant Vibration Damping
Uses	Connectors Diaphragms Seals
Forms	Liquid
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.13	g/cm³	DIN 53479

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	65		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	9.00	MPa	DIN 53504
Tensile Elongation (Break)	450	%	DIN 53504
Tear Strength ¹	45.0	kN/m	ASTM D624
Compression Set (175°C, 22 hr)	25	%	DIN 53517

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit	Test Method
Vulcanization (175°C)	10.0	min

Uncured Properties	Nominal Value	Unit	Test Method
Color
-- ²	Translucent
-- ³	Translucent
Viscosity			DIN 53018
20°C ⁴	550	Pa·s
20°C ⁵	550	Pa·s
Pot Life (20°C)	4300	min

Note Message
1 .	Die B
2 .	Part B
3 .	Part A
4 .	Part B
5 .	Part A

Resin Grade	Manufacturer	Category	Trademark
FHR Polypropylene 23S2A	Flint Hills Resources, LP	PP Random Copolymer	FHR Polypropylene
DURACON® SW-41	Polyplastics Co., Ltd.	Acetal (POM) Copolymer+PE	DURACON®
KOCETAL® GB705	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®
LIHAN® B9000N	Nanjing Lihan Chemical Co., Ltd.	Nylon 6	LIHAN®
Plexar® PX2413	LyondellBasell Industries	HDPE	Plexar®