Order Products : sales@su-jiao.com
Polifil® Nylon 82MR
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | The Plastics Group |
| Trademark: | Polifil® Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Cutil1_Polifil-Nylon-82MR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polifil® GFN/MRN 6 reinforced series of compounds provide good heat and dimensional stability. These have been found useful in industrial clamp components as well as bearings. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.90 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 114 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 5520 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 82.7 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 23°C | 3.0 | % | |
| Break, 23°C | 6.0 | % | |
| Flexural Modulus - Tangent (23°C) | 5170 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 131 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 48 | J/m | ASTM D256 |
| Gardner Impact (23°C, 12.7 mm) | 1.36 | J | ASTM D3029 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 204 | °C | |
| 1.8 MPa, Unannealed | 120 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 249 | °C | |
| Middle Temperature | 271 | °C | |
| Front Temperature | 282 | °C | |
| Nozzle Temperature | 282 | °C | |
| Processing (Melt) Temp | 277 to 293 | °C | |
| Mold Temperature | 37.8 to 93.3 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 to 0.517 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 800 TFE 20 Z | RTP Company | Acetal (POM) Copolymer | RTP |
| KYDEX® 430 | SEKISUI Polymer Innovations, LLC | ABS+PVC | KYDEX® |
| Sylvin 83014-95FU Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| NHU-PPS 1470C/F-W | Zhejiang NHU Comp. Ltd. | PPS | NHU-PPS |
| Neoflex™ 8140 | Zylog Plastalloys Pvt. Ltd. | TPE | Neoflex™ |
