Order Products : sales@su-jiao.com
MAJORIS DW400
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CpLbLq_MAJORIS-DW400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DW400 is a 40% glass - filled polypropylene compound intended for injection moulding. The product is available in both black (DW400 - 8229) and natural (DW400) but other colours can be provided on request. DW400 has been developed especially for the automotive applications and electrical components. The good flowability of DW400 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. DW400 is formulated to give an excellent surface finish with good scuff resistance. APPLICATIONS Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from DW400. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 21.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 2450 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 72.0 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 260 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 701 Z | RTP Company | HDPE | RTP |
| Crastin® SK605 NC010 | DuPont Performance Polymers | PBT | Crastin® |
| Electroblend® HIPS-1800 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PS (HIPS) | Electroblend® |
| Plaslube® NY-1/MS/5 BK223 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| POLYFORT® FPP 1697 | A. Schulman Inc. | PP, Unspecified | POLYFORT® |
