Order Products : sales@su-jiao.com
Dryflex® SE 60A301N U
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Coh23Z_DryflexSE60A301NU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex SE 60A301N U: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 60 Shore A Service Temperature: -50°C to +125°C (Unstresses Material). Colour: Natural, but available in any colour shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 - 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 60 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow | ISO 37 | ||
| 100% strain | 1.40 | MPa | ISO 37 |
| 300% strain | 2.00 | MPa | ISO 37 |
| Tensile Stress - Across Flow (Yield) | 7.00 | MPa | ISO 37 |
| Tensile Elongation - Across Flow (Break) | 850 | % | ISO 37 |
| Tear Strength - Across Flow 2 | 19 | kN/m | ISO 34-1 |
| Compression Set 3 | ISO 815 | ||
| 23°C, 72 hr | 23 | % | ISO 815 |
| 70°C, 22 hr | 41 | % | ISO 815 |
| 100°C, 22 hr | 69 | % | ISO 815 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 180 - 210 | °C | |
| Mold Temperature | 15 - 50 | °C |
| Note Message | |
|---|---|
| 1 . | Depending on shape of the detail and placement of gate |
| 2 . | C method: crescent sample |
| 3 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP PPH5TF2-Natural | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| Fainplast PVC FKA 92 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| KW Plastics KWR105 | KW Plastics | HDPE | KW Plastics |
| Lion Idemitsu Composites PPS C-220SG | Lion Idemitsu Composites Co., Ltd. | PPS | Lion Idemitsu Composites PPS |
| Novalloy-S S3500 | PlastxWorld Inc. | PC+ABS | Novalloy-S |
