Order Products : sales@su-jiao.com
Indothene LL LL 36RA045 UV
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Indothene LL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CocbHx_Indothene-LL-LL-36RA045-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Indothene-LL LL36RA045UV is a Linear Medium Density Polyethylene produced by gas phase fluidised bed process using butene as comonomer. This grade is stabilised with appropriate quantity of HALS to give a long service with continuos outdoor exposure with or without blending of any carbon black. Indothene-LL LL36RA045UV when pulverised into 20-30 mesh powder offers, good processability. This grade has very good Environmental Stress Crack Resistance (ESCR) and a combination of Hardness and Impact strength. This grade contains normal dose of AO and high dose of UV stabiliser. FOOD CONTACT APPLICATIONS : This grade meets the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It also conforms to the positive list of constituents as approved in IS:10141:1982. The antioxidant content of the grade is <3000 ppm. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.936 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 350 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 2.00 mm, Compression Molded) | 18.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 20 | % | ASTM D638 |
| Flexural Modulus (3.20 mm, Compression Molded) | 600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm, Injection Molded) | 250 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 117 | °C | ASTM D1525 |
| Melting Temperature | 123 - 125 | °C |
| Additional Information |
|---|
| Enviro. Stress Crack Res, F50, 10% Igepal: > 350 hrs. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P52-004A-3B | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Promyde® B30 P2 G30 U0 | NUREL, S.A. | Nylon 6 | Promyde® |
| Shinko-Lac® ASA TA-15L | Mitsubishi Rayon America Inc. | ASA+PC | Shinko-Lac® |
| Adiprene® LF 950A | Chemtura | PUR-Ether/TDI | Adiprene® |
| Hyundai EP PPF HT121 | HYUNDAI EP Co., Ltd. | PP Homopolymer | Hyundai EP PPF |
