Order Products : sales@su-jiao.com
Geon™ 180 Series 180X7
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ 180 Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CnrsbS_Geon-180-Series-180X7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon® 180X7 is low molecular weight homopolymer resin that provides good chemical foam characteristics with excellent overblow resistance. The modified rhelogy of Geon® 180X7 provides increased viscosity and yield. Geon® 180X7 is recommended for applications where high Brookfield Viscosity and yield are required such as higly plasticized low density chemically blown foams, highly plasticized formulations, and weather stripping. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 65.0 | Internal method | |
| Intrinsic Viscosity | 0.90 | ASTM D1243-60-A | |
| Water content- Karl Fisher 2 | 0.060 | % | Internal method |
| Volume density | 400 | g/l | |
| Relative Viscosity 3 | 2.20 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Optimal stretch- PP 4 | 18.4 | MPa | ASTM D638 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss- 60 degree fused 5 mins @ 350F 5 | 91 | % | Internal method |
| Transparency-Transmittance- PP 6 | 85 | % | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity | Internal method | ||
| Initial Viscosity @ 2 rpm 7 | 19.8 | Pa·s | Internal method |
| Initial Viscosity @ 20 rpm 8 | 10.6 | Pa·s | Internal method |
| One Day Viscosity @ 2 rpm 9 | 23.3 | Pa·s | Internal method |
| One Day Viscosity @ 20 rpm 10 | 11.8 | Pa·s | Internal method |
| Cut off the outflow- 95 psi 11 | 132.00 | g/10 min | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| North fineness 12 | 4.50 | Hegman | Internal method |
| Residual Vinyl Chloride Monomer 13 | ppm | Internal method | |
| Methanol extractable 14 | 3.5 | % | Internal method |
| polymerization process | Dispersion | ||
| Gel temperature- PP 15 | 72 | °C | Internal method |
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® ALTC and ASTM D638 (formulation): 100phr Geon® 180X7, 57phr DINP, 3phr ESO, and 2phr Therm-Chek SP 120 LOHFGeon® STP 390 (formulation): 100phr Geon® 180X7, and 60phr DOP |
| Note Message | |
|---|---|
| 1 . | Interrelationship |
| 2 . | Karl Fisher-Geon® 683c |
| 3 . | Interrelationship |
| 4 . | With provided formulation |
| 5 . | 60°，FF，ALTC-65 |
| 6 . | Geon® ALTC 66 (with provided formulation) |
| 7 . | Initial V2,Geon®1253 |
| 8 . | Initial, V20,Geon®1253 |
| 9 . | One day, V2 |
| 10 . | One day, V20 |
| 11 . | 95 psi，Geon® 1010 |
| 12 . | Geon® 390 |
| 13 . | Geon® STP 1005 |
| 14 . | Geon® 894 |
| 15 . | Geon® ALTC 29 (with provided formulation) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Next Nylon 66 Prime Series PGHS35-01NC | Next Polymers Ltd. | Nylon 66 | Next Nylon 66 Prime Series |
| BESTDUR TXG6/02 | Triesa Plastics | PBT | BESTDUR |
| Foam-It® 8 | Smooth-On, Inc | PUR, Unspecified | Foam-It® |
| LNP™ THERMOCOMP™ GF003 compound | SABIC Innovative Plastics | PSU | LNP™ THERMOCOMP™ |
| Sylvin 7868-75C Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
