Order Products : sales@su-jiao.com
MARPOL® LDM 740
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CgaaID_MARPOL-LDM-740.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Recommended Applications Caps, closures, compounding, injection molding, viscosity modifier, and master base resin Description MARPOL® LDM 740 is a high melt index, low density polyethylene resin engineered for injection molding and compounding applications that require high f ow. This is an ideal resin for tear-to-open closures. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 40 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 88 | ||
| Shore D | 43 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 13.8 | MPa | |
| Break | 6.89 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 30 | % | |
| Break | 110 | % | |
| Flexural Modulus - 1% Secant | 283 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact | ASTM D3763 | ||
| -58°C | 19.0 | J | |
| -36°C | 21.7 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 86.1 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rainmaker Polypropylene MCHPTL20 | Rainmaker Polymers LLC | PP Homopolymer | Rainmaker Polypropylene |
| SHIN-A SAP-4606XB60 | SHIN-A T&C | Acrylic, Unspecified | SHIN-A |
| THERMOLAST® K TF4BNA (Series: FC/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Extir® A 3000 AE | Versalis S.p.A. | PS (EPS) | Extir® |
| Hipolyene 2703 MS EX 3 | Zylog Plastalloys | TPO (POE) | Hipolyene |
