Order Products : sales@su-jiao.com

AXELERON™ CX 6944 NT CPD

Category:	HDPE , High Density Polyethylene Insulation Compound
Manufacturer:	The Dow Chemical Company
Trademark:	AXELERON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CdFpxZ_AXELERON-CX-6944-NT-CPD.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
High density insulating material AXELERON™CX A- 6944 NT is a high-density polyethylene resin used to make air-injected foaming insulation materials for CATV cables. This high-density polyethylene resin has excellent electrical properties and toughness, as well as the stability required in its application field. AXELERON™CX A- 6944 NT often and AXELERON™CX 1253 NT CPD LDPE is used together. In order to achieve the optimal cell structure, it is recommended to add 0.1% to 0.3% nucleating agents, such as AXELERON.™CX A- 0012 NT CPD and AXELERON™Nucleating agent added to CX 0078 NT CPD masterbatch. Specifications AXELERON™CX A- 6944 NT meets the following raw material specifications: ASTM D 1248 Type IV, Class A, Category 3 Under the conditions of adopting the correct commercial extruder extrusion processing specifications, use AXELERON™CX A- 6944 NT wires as insulating materials should meet the following specifications: Telecordia GR-1398-CORE Telecordia GR-1399-CORE

Message

High density insulating material
AXELERON™CX A- 6944 NT is a high-density polyethylene resin used to make air-injected foaming insulation materials for CATV cables. This high-density polyethylene resin has excellent electrical properties and toughness, as well as the stability required in its application field. AXELERON™CX A- 6944 NT often and AXELERON™CX 1253 NT CPD LDPE is used together. In order to achieve the optimal cell structure, it is recommended to add 0.1% to 0.3% nucleating agents, such as AXELERON.™CX A- 0012 NT CPD and AXELERON™Nucleating agent added to CX 0078 NT CPD masterbatch.

Specifications
AXELERON™CX A- 6944 NT meets the following raw material specifications:

ASTM D 1248 Type IV, Class A, Category 3

Under the conditions of adopting the correct commercial extruder extrusion processing specifications, use AXELERON™CX A- 6944 NT wires as insulating materials should meet the following specifications:

Telecordia GR-1398-CORE

Telecordia GR-1399-CORE

General Information
Additive	Nucleating agent
Uses	Coaxial Cable Insulation Wire and cable applications Communication wire insulation material Communication Equipment
Agency Ratings	ASTM D 1248, IV, Class A, Cat. 3
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.965	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	33.1	MPa	ASTM D638
Tensile Elongation (Break)	650	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -100	°C	ASTM D746

Electrical	Nominal Value		Test Method
Dielectric Constant (1 MHz)	2.34		ASTM D1531
Dissipation Factor (1 MHz)	4.0E-5		ASTM D1531

Extrusion	Nominal Value	Unit
Melt Temperature	160 - 179	°C

Extrusion instructions
Melt extrusion temperatures in the range of 320 to 355°F (160 to 179°C) are suggested for AXELERON™ CX 6944 NT CPD.

Resin Grade	Manufacturer	Category	Trademark
RTP 6003-45A	RTP Company	TPE	RTP
TECHNYL® A 246M NATURAL	Solvay Engineering Plastics	Nylon 66	TECHNYL® A
Capa™ 6200	Perstorp Holding AB	PCL	Capa™
Edgetek™ PF-05GF/000 FR MR	PolyOne Corporation	PSU	Edgetek™
PermaStat® 2800-90A	RTP Company	TPO (POE)	PermaStat®