Order Products : sales@su-jiao.com
Sumitomo DAP FS-80-P-1
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Cag8GX_Sumitomo-DAP-FS-80-P-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FS-80-P-1 is a long glass fiber reinforced, flame retardant, diallyl meta-phthalate molding compound, which meets the requirements of ASTM D5948 Type GII-30F |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.73 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (Compression Molded) | 0.15 to 0.35 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Compression Molded) | 88.0 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 13800 | MPa | ASTM D790 |
| Flexural Strength (Compression Molded) | 143 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 350 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | > 260 | °C | ASTM D648 |
| Thermal Conductivity | 0.34 | W/m/K | ASTM C177 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| -- 2 | 17 | kV/mm | |
| -- 3 | 15 | kV/mm | |
| Dielectric Constant 4(1 kHz) | 3.30 | ASTM D2520 | |
| Dissipation Factor 5(1 kHz) | 0.020 | ASTM D150 | |
| Arc Resistance | 180 | sec | ASTM D495 |
| Comparative Tracking Index | > 600 | V | IEC 60112, ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 41 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | Wet, 60 Hz |
| 2 . | Method A (Short-Time) |
| 3 . | Method B (Step-by-Step) |
| 4 . | Wet |
| 5 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SureSpec HP-350 | Genesis Polymers | PP Homopolymer | SureSpec |
| UNISOFT ADHESION™ AD-60A-CL-8-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT ADHESION™ |
| LNP™ LUBRICOMP™ RZL16 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
| LNP™ THERMOCOMP™ UF0037W compound | SABIC Innovative Plastics | PPA | LNP™ THERMOCOMP™ |
| MAJORIS AT200 | AD majoris | PP, Unspecified | MAJORIS |
