Order Products : sales@su-jiao.com
Ablebond 958-11
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Henkel Ablestik |
| Trademark: | Ablebond |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ca2DND_Ablebond-958-11.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ABLEBOND® 958-11 adhesive is designed to absorb stresses produced when bonding large ICs. ABLEBOND® 958-11 meets the requirements of MIL-STD-883, Method 5011. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | ||
|---|---|---|---|
| pH | 4.0 to 9.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Ionic Chloride | < 300 | ppm | |
| Ionic Potassium | < 50.0 | ||
| Ionic Sodium | < 50.0 | ||
| Lap Shear - Aluminum (25°C) | > 18.6 | MPa | |
| Shear Strength - Die (Gold) 1(25°C) | > 25 | N | |
| Water Extract Conductivity | 43.0 | µS/cm | |
| Weight Loss on Heating (200°C) | < 1.0 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 89.0 | °C | DSC |
| CLTE - Flow | |||
| < 89°C | 1.5E-5 | cm/cm/°C | |
| > 89°C | 4.5E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 5.0E+14 | ohms·cm | ASTM D257 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life (25°C) | 20000 | min | |
| Shelf Life (-40°C) | 52 | wk | |
| Thermoset Mix Viscosity (25°C) | 40000 to 50000 | cP | |
| Post Cure Time | |||
| 130°C | 2.0 | hr | |
| 150°C | 1.0 | hr |
| Note Message | |
|---|---|
| 1 . | 2 X 2 mm Ceramic |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| StarTwist™ 315XM (metallized) | Innovia Films Ltd. | CA | StarTwist™ |
| NOVAREX® M7020AD2 | Mitsubishi Engineering-Plastics Corp | PC | NOVAREX® |
| Globalprene® 9552U | Lee Chang Yung Chemical Industry Corp. | SEBS | Globalprene® |
| LNP™ LUBRICOMP™ KL004L compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ LUBRICOMP™ |
| Durethan® BKV 130 GIT DUS008 900116 | LANXESS Corporation | Nylon 6 | Durethan® |
