Order Products : sales@su-jiao.com
Acculam™ Epoxyglas G11/FR5
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Accurate Plastics, Inc. |
| Trademark: | Acculam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CYVwvi_Acculam-Epoxyglas-G11-FR5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Acculam® Epoxyglas G11/ FR5 -Laminate sheet comprised of flame retardant/heat resistant epoxy resin and a woven fiberglass substrate. It qualifies to NEMA FR5 and MIL-I-24678/28. This material exhibits extremely high mechanical strength at elevated temperatures. It shows good dielectric loss and electric strength properties under both dry and humid conditions. It has good chemical resistance and low moisture absorption. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr, 3.18 mm) | < 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 115 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength | ASTM D790 | ||
| -- 1 | > 276 | MPa | |
| 3.18 mm 2 | > 517 | MPa | |
| Compressive Strength 3 | > 448 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 4 | > 430 | J/m | |
| -- 5 | > 530 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Temperature Index | 180 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Breakdown | |||
| -- 6 | > 50000 | V | |
| A | > 50000 | V |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bond Strength | > 1.0E+6 | g |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Relative Permittivity 7 | 4.80 | IEC 60250 | |
| Dissipation Factor | ASTM D150 | ||
| -- 8 | 0.018 | ||
| -- 9 | 0.017 |
| Note Message | |
|---|---|
| 1 . | LW-E 1/150 |
| 2 . | LW-A |
| 3 . | Flatwise |
| 4 . | CW |
| 5 . | LW |
| 6 . | D48/50 |
| 7 . | D24/23 |
| 8 . | D24/23 |
| 9 . | A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SPESIN® KP212G30V0 | Kolon Plastics, Inc. | PBT | SPESIN® |
| Alpha PVC GM 8015-O NATURAL LCF | AlphaGary | PVC, Unspecified | Alpha PVC |
| APEX® 3300-68NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Dialon 3035 | DTR S.r.l. (Develop Thermoplastic Resins) | PC | Dialon |
| Cereplast Compostables® 3002 | Trellis Bioplastics | PLA | Cereplast Compostables® |
