Order Products : sales@su-jiao.com
Generic DAP - Mineral
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CVhDWI_Generic-DAP---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic DAP - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.75 - 1.86 | g/cm³ | ASTM D792 |
| Bulk Factor | 2.3 | ASTM D1895 | |
| Molding Shrinkage - Flow (23°C) | 0.25 - 0.51 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 51.7 - 55.2 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 8170 - 11700 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 89.6 - 104 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 144 - 152 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 - 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 161 - 274 | °C | ASTM D648 |
| CLTE - Flow | 2.5E-5 - 4.6E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (23°C) | 14 - 16 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 3.68 - 4.70 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.010 - 0.025 | ASTM D150 | |
| Arc Resistance | 135 - 180 | sec | ASTM D495 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 113 - 143 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic DAP - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 216 NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Sunny® PBT-PET EN230 | Guangdong Shunde Shunyan New Material Co., Ltd. | PBT+PET | Sunny® |
| Gallonprene® GP310-6503 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| LNP™ THERMOCOMP™ GF004 compound | SABIC Innovative Plastics | PSU | LNP™ THERMOCOMP™ |
| SIBUR Synthetic Rubber SBR-1706 Grade C | SIBUR | SBR, Emulsion | SIBUR Synthetic Rubber |
