Order Products : sales@su-jiao.com
Advanced Composites ATX781
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CTiTbc_Advanced-Composites-ATX781.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Advanced Composites ATX781 is a polypropylene product,. It is available in North America. Typical application areas are: automotive industry. The main characteristics are: impact resistance. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 15 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 19.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 440 | % | ISO 527-2 |
| Flexural Modulus | 1250 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 6.7 | kJ/m² | ISO 180 |
| 23°C | 34 | kJ/m² | ISO 180 |
| Instrumented Dart Impact 1(-30°C) | 40.2 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 93.9 | °C | ISO 75-2/B |
| Additional Information |
|---|
| Instrumented Impact, ASTM D3763, 6.7 m/s, -30°C: 40.2 J 10/10 Ductility |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 199 | °C | |
| Middle Temperature | 210 - 227 | °C | |
| Front Temperature | 227 | °C | |
| Nozzle Temperature | 227 | °C | |
| Processing (Melt) Temp | 216 - 238 | °C | |
| Mold Temperature | 26.7 - 43.3 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 50 to 60% of machine capacityScrew RPM: 1 to 2 secs before mold open |
| Note Message | |
|---|---|
| 1 . | 6.70 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL TP-GP2 | Polymer Resources Ltd. | PBT | PRL |
| SABIC® PPcompound 8700 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| SEETEC EVA VA810 | Lotte Chemical Corporation | EVA | SEETEC EVA |
| EnCom GF15 PPE-PS | EnCom, Inc. | PPE+PS | EnCom |
| KEBAFORM® C 908 EL | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
