Order Products : sales@su-jiao.com
ELASTOSIL® M 4643 A/B
| Category: | Silicone , Silicone |
| Manufacturer: | Wacker Chemie AG |
| Trademark: | ELASTOSIL® M |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CStmnN_ELASTOSIL-M-4643-A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Silicone Rubber, RTV-2 Rapid Prototyping, Plastics and Rubber Processing Rapid Prototyping, Pharmaceuticals & Healthcare Mold Making, Automotive & Transportation Rapid Prototyping, Household Care Mold Making, Composites Mold Making, Construction Rapid Prototyping, Automotive & Transportation Mold Making, Plastics and Rubber Processing Mold Making, Mold Making |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | Grey | ||
| Density | 1.31 | g/cm³ | ISO 2781 |
| Viscosity | 25 | Pa·s | ISO 3219 |
| Curing Time | 12 | hr | |
| Pot Life | 90 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 48 | ISO 868 | |
| Tensile Strength | 5.00 | MPa | ISO 37 |
| Tensile Elongation at Break | 300 | % | ISO 37 |
| Tear Strength | > 10.0 | kN/m | ASTM D624B |
| Linear Shrinkage | < 0.10 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resinoid 1345 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| MIDILENA III HDPE RBF0.08 | ROMPETROL PETROCHEMICALS S.R.L. | HDPE | MIDILENA III |
| ULTEM™ STM1700 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| AMPLIFY™ TY 1052H | The Dow Chemical Company | MAH-g | AMPLIFY™ TY |
| LEXAN™ 241R resin | SABIC Innovative Plastics | PC | LEXAN™ |
