Order Products : sales@su-jiao.com
BCC Resins BC 8675E
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CPcEDv_BCC-Resins-BC-8675E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BC 8675E is a multi-purpose elastomer that can perform many functions. Typical product features are: easy to use, cures at room temperature, resists moisture absorption, excellent in use for molds for casting of concrete and plaster, does not contain MOCA, MDA, TDI or MDI. Product uses include: mold fabrication, shock absorbent pads and liners, excellent as an adhesive for high strength and resilient bonds, electrical potting and cable sealing applications, various types of urethane rubber parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.15 | % | ASTM D955 |
| Water Absorption 1(Saturation) | 2.8 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 73 to 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 15.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Tear Strength 2 | 33.3 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 45 | ||
| Thermoset Mix Viscosity | 3000 | cP | ASTM D2393 |
| Demold Time (24°C) | 480 to 840 | min | |
| Post Cure Time | |||
| 23°C | 72 to 120 | hr | |
| 66°C | 4.0 to 6.0 | hr | |
| Gel Time 3 | 40.0 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Work Life (25°C) | 25.0 | min |
| Note Message | |
|---|---|
| 1 . | 2 weeks |
| 2 . | Die C |
| 3 . | 180 gm mass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 8620 | SABIC Innovative Plastics | PP, Unspecified | SABIC® PPcompound |
| 3M™ Dyneon™ Fluoroplastic THV 610GZ | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroplastic |
| 3M™ Dyneon™ PTFE Compound TF 4103 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
| Ebalta MG 815 / MG 815 FR | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| ELASTOSIL® R 420/40 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
