Order Products : sales@su-jiao.com

Ingeo™ 10361D

Category:	PLA , Polylactic Acid
Manufacturer:	NatureWorks® LLC
Trademark:	Ingeo™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CLGgFQ_Ingeo10361D.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Ingeo biopolymer 10361D, a NatureWorks LLC product, is a thermoplastic binder or adhesive-grade resin derived from annually renewable resources. Available in pellet form, 10361D is designed for use as a binder or adhesive component in formulated products where an amorphous/low melting, high-flow resin is desired. Ingeo biopolymer 10361D can be utilized in a broad range of binder or adhesive products. Potential applications for Ingeo biopolymer 10361D include: Binder for inorganic pigments, dyes or colorant products for plastics, paints and coatings or printing applications. Binders for bonding cellulosic materials or natural fibers. Components or base for adhesive formulations for hot-melts, emulsions or dispersions.

Message

Ingeo biopolymer 10361D, a NatureWorks LLC product, is a thermoplastic binder or adhesive-grade resin derived from annually renewable resources. Available in pellet form, 10361D is designed for use as a binder or adhesive component in formulated products where an amorphous/low melting, high-flow resin is desired. Ingeo biopolymer 10361D can be utilized in a broad range of binder or adhesive products.

Potential applications for Ingeo biopolymer 10361D include:

Binder for inorganic pigments, dyes or colorant products for plastics, paints and coatings or printing applications.

Binders for bonding cellulosic materials or natural fibers.

Components or base for adhesive formulations for hot-melts, emulsions or dispersions.

General Information
Features	Comstable Updatable resources
Uses	Adhesive Adhesive
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)	70 - 85	g/10 min	ASTM D1238
Relative Viscosity	2.50

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	55.0 - 60.0	°C	ASTM D3417

Fill Analysis	Nominal Value	Unit
Melt Density (230°C)	1.08	g/cm³

Resin Grade	Manufacturer	Category	Trademark
Radilon® BGK 30 Natural	Radici Plastics	Nylon 6	Radilon®
VALOX™ VX4910 resin	SABIC Innovative Plastics Europe	ABS+PBT	VALOX™
Andur 6500 DPLF	Anderson Development Company	PUR-Ether/TDI	Andur
DENYL 6 3040 MQ	Vamp Tech	Nylon 6	DENYL
Optix® CP-80	Plaskolite West, Inc.	Acrylic (PMMA)	Optix®