Order Products : sales@su-jiao.com
Infino LS-1150G
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | SAMSUNG SDI CO., LTD. |
| Trademark: | Infino |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CL7vEm_Infino-LS-1150G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Material with 15% GF reinforcement that can be applied to mold frame for LCD BLU |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (250°C/10.0 kg) | 24 | g/10 min | ASTM D1238, ISO 1133 |
| Ash Content | 15 | % | ISO 3451 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 121 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4500 | MPa | ISO 527-2/50 |
| Tensile Strength | |||
| Yield 1 | 88.0 | MPa | ASTM D638 |
| Yield | 86.0 | MPa | ISO 527-2/50 |
| Break | 98.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 3.6 | % | ISO 527-2/50 |
| Flexural Modulus | |||
| -- 2 | 4500 | MPa | ASTM D790 |
| -- 3 | 4400 | MPa | ISO 178 |
| Flexural Strength | |||
| -- 4 | 140 | MPa | ASTM D790 |
| -- 5 | 135 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 6(23°C) | 9.9 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact | |||
| 23°C, 3.18 mm | 88 | J/m | ASTM D256 |
| 23°C 7 | 8.2 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed, 4.00 mm | 122 | °C | ISO 75-2/B |
| 0.45 MPa, Annealed | 128 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed, 6.40 mm | 127 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 4.00 mm | 120 | °C | ISO 75-2/A |
| 1.8 MPa, Annealed, 4.00 mm | 123 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 128 | °C | ISO 306/B50 |
| -- | 130 | °C | ISO 306/B120 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.800 to 3.00 mm) | V-2 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 120 | °C | |
| Desiccant Dryer | 120 | °C | |
| Drying Time | |||
| -- | 4.0 to 6.0 | hr | |
| Desiccant Dryer | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Rear Temperature | 250 to 260 | °C | |
| Middle Temperature | 270 | °C | |
| Front Temperature | 280 | °C | |
| Nozzle Temperature | 280 | °C | |
| Mold Temperature | 50.0 to 80.0 | °C | |
| Injection Pressure | 58.8 to 216 | MPa | |
| Back Pressure | 0.490 to 1.96 | MPa | |
| Screw Speed | 50 to 150 | rpm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 2.8 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.8 mm/min |
| 5 . | 2.0 mm/min |
| 6 . | Thickness: 4 mm |
| 7 . | Thickness: 4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TC5HAZ (Series: AD/POM) | KRAIBURG TPE | TPE | THERMOLAST® K |
| VENYL VG307 - 8020 | AD majoris | Nylon 66/6 | VENYL |
| Adell PP RR-14 | Adell Plastics, Inc. | PP Copolymer | Adell PP |
| Ad-Tech Epoxy CER-112 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Evoprene™ GC 5616 | AlphaGary | SEBS | Evoprene™ GC |
