Order Products : sales@su-jiao.com
DuraGrip® DGR 6240TR
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Advanced Polymer Alloys |
| Trademark: | DuraGrip® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CKC7MX_DuraGrip-DGR-6240TR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DuraGrip® 6240TR is designed to be a general purpose Thermoplastic Elastomer (TPE) that is easy to use in injection molding and extrusion processes. DuraGrip® 6240TR has an excellent soft touch feel, is highly elastic, will bond to polypropylene and polyethylene, and is FDA compliant. DuraGrip® 6240TR is not hygroscopic and under normal conditions does not require drying. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.882 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 16 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 40 | ASTM D2240, ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412, ISO 37 | ||
| 100% strain | 1.09 | MPa | ASTM D412, ISO 37 |
| 300% strain | 2.51 | MPa | ASTM D412, ISO 37 |
| Tensile Strength (Yield) | 7.04 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 540 | % | ASTM D412, ISO 37 |
| Tear Strength 1 | 18.7 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C, 200 sec^-1) | 255 | Pa·s | ASTM D3835 |
| Additional Information |
|---|
| The value listed as Density -Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.The value listed as Density, ISO 1183, was tested in accordance with ISO 2781. |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mowiol® 4-88 | Kuraray Co., Ltd. | PVOH | Mowiol® |
| Terblend® N 3154 | INEOS Styrolution Group GmbH | ABS+Nylon | Terblend® N |
| Lucene™ LC175 | LG Chem Ltd. | TPO (POE) | Lucene™ |
| NORYL™ WCA875 resin | SABIC Innovative Plastics Asia Pacific | PPE+TPE | NORYL™ |
| ULTEM™ CRS5201 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
