Order Products : sales@su-jiao.com

Qenos PE HD0397UV

Category:	HDPE , High Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	Qenos PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CID4Re_Qenos-PE-HD0397UV.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

HD0397UV is a highly UV stabilized injection molding grade of High Density Polyethylene combining excellent impact resistance with high hardness, stiffness and toughness.

HD0397UV is especially designed for the production of moldings demanding the combination of food contact suitability, very good mechanical properties and a high level of UV stabilizer to give protection for outdoor use. Suitability for use in any application should be determined by appropriate performance testing.

General Information
Additive	UV Stabilizer
Features	Food Contact Acceptable Good Toughness Good UV Resistance High Density High Hardness High Impact Resistance High Stiffness
Uses	Non-specific Food Applications Outdoor Applications
Agency Ratings	AS 2070-1999 4.1.1(a) FDA 21 CFR 176.170(c), Table 2 2 FDA 21 CFR 177.1520(c) 3.1a
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.955	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	46.0	MPa	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	29.0	MPa	ASTM D638
Flexural Modulus	1100	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-30°C)	38	J/m	ASTM D256A

Resin Grade	Manufacturer	Category	Trademark
SUSTAMID 66 GF 30	Röchling Sustaplast SE & Co. KG	Nylon 66	SUSTAMID
TOTAL Polyethylene HDPE 5802	TOTAL Refining & Chemicals	HDPE	TOTAL Polyethylene
Nylene® BS-700-A	Custom Resins Group	Nylon 6	Nylene®
Polifil® Nylon 836L	The Plastics Group	Nylon 6	Polifil® Nylon
Sylvin 8220-65 Grey 9521	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin