Order Products : sales@su-jiao.com
ENVIROPLAS® ENV13-NC230
| Category: | PC , Polycarbonate |
| Manufacturer: | ENVIROPLAS®, Inc. |
| Trademark: | ENVIROPLAS® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CHBKTo_ENVIROPLAS-ENV13-NC230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Injection Molding - Structural Foaming Grade, Non-Halogenated/Non-Brominated Flame Retardant, 5 % Fiberglass Reinforced, RoHS Compliant NC0230 = To Be Assigned 5 Digit Number Indicating Natural, Black, or Custom Color. The ENV13 Series Products Are Available With Mold Release and/or UV Stabilizer. Contact Enviroplas Regarding UL Recognized Versions Of This Product. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 5.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Ash Content | 5.0 | % | ASTM D5630 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 67.6 | MPa | ASTM D638 |
| Flexural Modulus | 3450 | MPa | ASTM D790 |
| Flexural Strength | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 142 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 5VA | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 254 - 266 | °C | |
| Middle Temperature | 293 - 316 | °C | |
| Front Temperature | 293 - 316 | °C | |
| Nozzle Temperature | 271 - 293 | °C | |
| Mold Temperature | 73.9 - 93.3 | °C |
| Injection instructions |
|---|
| Recommended Blow Agent (FLC95) Drying: 4 hrs. @ 225 °FRecommended Blowing Agent Concentration: 1.5 % nominal / Range 3 - 5 % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefanyl® VR VRGR 925 | Mitsubishi Chemical Performance Polymers, Inc. | PVC, Rigid | tefanyl® VR |
| Yanshan PE LD358 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Yanshan PS 685 | SINOPEC Beijing Yanshan Petrochemical | PS (GPPS) | Yanshan PS |
| Devcon Wear Guard™ Fine Load | Devcon | Epoxy | Devcon |
| LEXAN™ XHT3146 resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
