Order Products : sales@su-jiao.com
ENVIROPLAS® ENV11-NC720
| Category: | PC , Polycarbonate |
| Manufacturer: | ENVIROPLAS®, Inc. |
| Trademark: | ENVIROPLAS® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CGUzNd_ENVIROPLAS-ENV11-NC720.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Injection Molding Grade, Translucent - Opaque, Non-Halogenated, Flame Retardant, UV Stabilized, Mold Release, Excellent for Soft, Even, Light Diffusion Performance in LED Lighting Applications, RoHS Compliant |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 16 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 66.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 80 | % | ASTM D638 |
| Flexural Modulus | 2310 | MPa | ASTM D790 |
| Flexural Strength | 93.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 680 | J/m | ASTM D256 |
| Gardner Impact (23°C) | 45.2 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 124 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | Internal Method | ||
| 1.50 mm | V-0 | ||
| 3.00 mm | 5VA |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 254 to 266 | °C | |
| Middle Temperature | 266 to 277 | °C | |
| Front Temperature | 266 to 277 | °C | |
| Nozzle Temperature | 243 to 266 | °C | |
| Mold Temperature | 68.3 to 93.3 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Texalan® 7 Series 795A | Austin Novel Materials Co. Ltd. | TPU Alloy | Texalan® 7 Series |
| ADMER™ NF908A | Mitsui Chemicals America, Inc. | PE, Unspecified | ADMER™ |
| Fluon® LM-ETFE 740AP | Asahi Glass Co., Ltd. | ETFE | Fluon® |
| HOPELEN Y-120A | Lotte Chemical Corporation | PP Homopolymer | HOPELEN |
| Jam PE 23507 | Jam Petrochemical Company | LLDPE | Jam PE |
