Order Products : sales@su-jiao.com

Extreme™ HG

Category:	TPO , Compounded Polypropylene
Manufacturer:	Spartech Plastics
Trademark:	Extreme™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CFCpFh_Extreme-HG.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extreme™ HG is a high gloss, high performance, thermoplastic olefin (TPO) structure engineered for improved thermoforming characteristics. Extreme™ HG provides a wide processing range, enabling consistent, controlled sag sheet for stable thermoforming. For OEMs, Extreme™ HG provides excellent cold crack resistance, outstanding chemical resistance, a high gloss molded-incolor surface. Along with the improved processing window, Extreme™ HG provides the most cost effective TPO in marketplace for large part thermoforming applications. Features and Benefits High gloss cap surface Tough, high impact TPO structure Integral UV-protective packages for cap and substrate Wide thermoforming processing window Resilient to high vibration application Low CLTE for dimensional stability Target Markets & Applications Extreme™ HG is a great choice for a wide range of applications and market segments Agricultural & Construction Equipment - for engine hoods, covers, fenders, instrument panels Medium & Heavy Truck - for tank cover, air deflector, bumpers Recreational Vehicles - for front caps, end caps, ground effects Power Sports - for ATV fenders, flares, body armor, front hoods, canopies, accessories Automotive Aftermarket - for tonneau covers, scoops / spoliers, ground effects, step ups Lawn & Garden - for fenders, front hoods, instrument fronts, mower decks, canopies Marine - for kayak and paddle boat decks, instrument panels, light pods, storage covers Processing Extreme™ HG can be thermoformed in standard thermoforming ovens, although zoned ceramic or quartz heaters are recommended. Forming over temperature-controlled aluminum tooling results in the best part aesthetics. Molds made from fiberglass or epoxy, can be used for tooling prototyping or small part runs. Care must be taken in forming to heat sheet evenly and not overheat. Stock temperatures of approximately 340°F - 360 °F are recommended targets, but each process should be adjusted to allow proper forming. As with any thermoplastic material, coefficient of thermal expansion and mold shrinkage should be considered for proper part fit and tooling design. Colors & Textures Extreme™ HG can be matched in a wide variety of custom colors. Metallic colors available. Availability Textures - Smooth, hair cell and calf Availability Extreme™ HG is a custom extruded sheet product Sheet Size maximum width is 92-inch Gauges 0.060 - 0.400-inch Minimum Order - 5,000 lbs.

Message

Extreme™ HG is a high gloss, high performance, thermoplastic olefin (TPO) structure engineered for improved thermoforming characteristics. Extreme™ HG provides a wide processing range, enabling consistent, controlled sag sheet for stable thermoforming. For OEMs, Extreme™ HG provides excellent cold crack resistance, outstanding chemical resistance, a high gloss molded-incolor surface. Along with the improved processing window, Extreme™ HG provides the most cost effective TPO in marketplace for large part thermoforming applications.

Features and Benefits

High gloss cap surface

Tough, high impact TPO structure

Integral UV-protective packages for cap and substrate

Wide thermoforming processing window

Resilient to high vibration application

Low CLTE for dimensional stability

Target Markets & Applications
Extreme™ HG is a great choice for a wide range of applications and market segments

Agricultural & Construction Equipment - for engine hoods, covers, fenders, instrument panels

Medium & Heavy Truck - for tank cover, air deflector, bumpers

Recreational Vehicles - for front caps, end caps, ground effects

Power Sports - for ATV fenders, flares, body armor, front hoods, canopies, accessories

Automotive Aftermarket - for tonneau covers, scoops / spoliers, ground effects, step ups

Lawn & Garden - for fenders, front hoods, instrument fronts, mower decks, canopies

Marine - for kayak and paddle boat decks, instrument panels, light pods, storage covers

Processing
Extreme™ HG can be thermoformed in standard thermoforming ovens, although zoned ceramic or quartz heaters are recommended. Forming over temperature-controlled aluminum tooling results in the best part aesthetics. Molds made from fiberglass or epoxy, can be used for tooling prototyping or small part runs. Care must be taken in forming to heat sheet evenly and not overheat. Stock temperatures of approximately 340°F - 360 °F are recommended targets, but each process should be adjusted to allow proper forming. As with any thermoplastic material, coefficient of thermal expansion and mold shrinkage should be considered for proper part fit and tooling design.

Colors & Textures
Extreme™ HG can be matched in a wide variety of custom colors. Metallic colors available.
Availability Textures - Smooth, hair cell and calf
Availability
Extreme™ HG is a custom extruded sheet product

Sheet Size maximum width is 92-inch

Gauges 0.060 - 0.400-inch

Minimum Order - 5,000 lbs.

General Information
Additive	UV Stabilizer
Features	Good Dimensional Stability Good Toughness Good UV Resistance High Gloss High Impact Resistance Vibration Damping
Uses	Agricultural Applications Automotive Applications Automotive Bumper Automotive Exterior Parts Construction Applications Lawn and Garden Equipment Marine Applications Sporting Goods
Appearance	Colors Available Finishes Available
Forms	Sheet
Processing Method	Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.08 to 1.13	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)	0.70	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	21.4	MPa	ASTM D638
Flexural Modulus	1860	MPa	ASTM D790
Flexural Strength	66.2	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	350	J/m	ASTM D256
Gardner Impact	30.5	J	ASTM D3029

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed, 4.57 mm)	116	°C	ASTM D648
CLTE - Flow (-30 to 30°C)	4.0E-5	cm/cm/°C	ASTM D696

Optical	Nominal Value		Test Method
Gardner Gloss	85		ASTM D523

Resin Grade	Manufacturer	Category	Trademark
Mediprene® 520350M	ELASTO	SEBS	Mediprene®
AFFINITY™ PT 1450G1	The Dow Chemical Company	POP	AFFINITY™
Gallonprene® GP100-6001	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
EnCom PC 1016	EnCom, Inc.	PC	EnCom
LOXIM 220 01 V0	LOXIM Industries Private Limited	PBT	LOXIM