Order Products : sales@su-jiao.com
ECO-FLEX™ SA-75A
| Category: | RTPV , Thermoplastic Vulcanizate, Rubber Based |
| Manufacturer: | SYNESIS LLC |
| Trademark: | ECO-FLEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CDVXyc_ECO-FLEX-SA-75A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ECO-FLEX™ SA-75A is a Thermoplastic Vulcanizate, Rubber Based (RTPV) product. It is available in North America. Applications of ECO-FLEX™ SA-75A include additive/masterbatch, automotive, consumer goods and sheet. Primary characteristic: eco-friendly/green. |
| General Information | |
|---|---|
| Recycled Content |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 75 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 3.00 | MPa | ISO 37 |
| Tensile Stress 2(Yield) | 5.00 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 400 | % | ISO 37 |
| Tear Strength 4 | 26 | kN/m | ISO 34-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 1008 hr) | 9.0 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (100°C, 1008 hr) | -11 | % | ISO 188 |
| Change in Shore Hardness in Air (100°C, 1008 hr) | 1.0 | ISO 188 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -40.0 | °C | ISO 812 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | 39 | mm/min | SAE J369 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Ozone Resistance 5 | Pass - No Cracking | ISO 1431-1 |
| Note Message | |
|---|---|
| 1 . | Type 1, 50 mm/min |
| 2 . | Type 1, 50 mm/min |
| 3 . | Type 1, 50 mm/min |
| 4 . | Method Bb, Angle (Nicked), 50 mm/min |
| 5 . | Procedure A, 20% Elongation, 51 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 218 V25 NATURAL BA | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Daelim Po1y® TR-158 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Petrothene® GA694189 | LyondellBasell Industries | LLDPE | Petrothene® |
| Sylvin 4200-88 Orange 5104 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Durethan® BKV 50 H3.0 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
