Order Products : sales@su-jiao.com
DOW™ Electrical & Telecommunications DGDL-3479 NT
| Category: | HDPE , Colorable High Density Polyethylene Compound for Cable Jacketing |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ Electrical & Telecommunications |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CB4eBg_DOW-Electrical-Telecommunications-DGDL-3479-NT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dow Electrical and Telecommunications DGDL-3479 NT is a High Density Polyethylene compound produced from resin made by the UNIPOL™ process technology. Dow Electrical and Telecommunications DGDL-3479 NT is a prime quality telephone and power cable natural jacketing that provides good toughness, excellent stress-cracking resistance, and abrasion resistance. Specifications Dow Electrical and Telecommunications DGDL-3479 NT meets the following raw material specifications:
Cable jacketed with Dow Electrical and Telecommunications DGDL-3479 NT, using sound commercial extrusion practices, should meet the following specifications:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.942 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.040 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F0) | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 22.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 850 | % | ASTM D638 |
| Flexural Modulus | 827 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 1 | < -50.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.56 | ASTM D1531 | |
| Dissipation Factor (1 MHz) | 3.0E-4 | ASTM D1531 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| PENT | 200 | hr | ASTM F1473 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 235 - 255 | °C |
| Extrusion instructions |
|---|
| 加工和处理技巧：Dow AXELERON™ GP L-3479 NT 加工指导原则中包括使用建议的 455 到 491°F (235-255°C) 的熔体挤出温度范围。料筒在 180°F (82°C) 下干燥以去除湿气。但是，只有已知应用方式和加工设备的类型时，才能给出加工条件的具体建议。 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 GB 20 | RTP Company | Nylon 66 | RTP |
| SLOVAMID® 66 GF 33 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Latilub 66-20T G/40 | LATI S.p.A. | Nylon 66 | Latilub |
| OmniLon™ PA6/6 MF20 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| Pemex PX 22004 C | Pemex Petroquímica | LDPE | Pemex |
