Order Products : sales@su-jiao.com

ESENTTIA 40H92-SBC

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CAW1HT_ESENTTIA-40H92-SBC.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact"

Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

General Information
Features	Controlled Rheology Fast Molding Cycle Food Contact Acceptable General Purpose High Flow Homopolymer
Uses	Fabrics Fibers General Purpose Spunbond Nonwovens Thin-walled Parts
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Extrusion Coating Fiber (Spinning) Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	37	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	32.4	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	11	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1280	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	27	J/m	ASTM D256A

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
Cheng Yu A700UV	Cheng Yu Plastic Company Limited	ABS	Cheng Yu
DENKA EVA TEX 59	Denka Company Limited	EVA	DENKA EVA TEX
Iupilon® CGH1010R2	Mitsubishi Engineering-Plastics Corp	PC	Iupilon®
LNP™ THERMOCOMP™ RC004SXC compound	SABIC Innovative Plastics Europe	Nylon 66	LNP™ THERMOCOMP™
Medalist® MD-12180 (PRELIMINARY DATA)	Teknor Apex Company	TPE	Medalist™