Order Products : sales@su-jiao.com
Epolene® N-14
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CABVXp_Epolene-N-14.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epolene N-14 is a polyethylene (PE) homopolymer that can easily be melt blended with natural or synthetic waxes to increase the tensile strength of wax blends, improve the gloss of paper coatings, aid in pigment dispersion and mold release, and improve scuff and rub off resistance in printing inks. For these applications, six Epolene N-types, differing mainly in viscosity, are available to choose from (Epolene N-10, N-11, N-14, N-30, N-34, and N-35). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | ||
|---|---|---|---|
| Molecular Weight 1 | 4000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 108 | °C | ASTM E28 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 300 | mm | ASTM D5 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (125°C) | 150 | mPa·s |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SA132G30 | RJM International, Inc. | PC+PBT | RJM |
| Shinko-Lac® ABS TM25 | Mitsubishi Rayon America Inc. | ABS | Shinko-Lac® |
| Amilan® CM6021M | Toray Resin Company | Nylon Copolymer | Amilan® |
| DEXFLEX® E1800 | LyondellBasell Industries | TPO (POE) | DEXFLEX® |
| DynaMix™ 4144-35GF | Polymer Dynamix | PPA | DynaMix™ |
