Order Products : sales@su-jiao.com
Lionpol LC-60061
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Lion Polymers Incorporated |
| Trademark: | Lionpol |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CAAUq3_Lionpol-LC-60061.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lionpol LC-60061 is a thermoplastic elastomer (TPE) product,. It is available in North America. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.12 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.3 - 1.4 | % | ASTM D955 |
| Transverse flow | 1.4 - 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 61 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.50 | MPa | ASTM D412 |
| Tensile Strength (Break) | 13.1 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 780 | % | ASTM D412 |
| Compression Set | ASTM D395 | ||
| 70°C, 22 hr | 28 | % | ASTM D395 |
| 100°C, 22 hr | 38 | % | ASTM D395 |
| Additional Information |
|---|
| Permanent Set: 8% |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 182 - 193 | °C | |
| Front Temperature | 199 - 210 | °C | |
| Nozzle Temperature | 216 - 221 | °C | |
| Mold Temperature | 37.8 - 60.0 | °C | |
| Back Pressure | 0.552 - 1.03 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PPR PA6602 | Premier Plastic Resins, Inc. | Nylon 66 | PPR |
| Silamid® EF | Roonamid a.s. | Nylon 6 | Silamid® |
| SLOVAMID® 6 GF 5 T 20 FRG 2 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Chemraz 639 | Greene, Tweed & Co. | Perfluoroelastomer | Chemraz |
| PLUSTEK PA325G6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
