| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C8eirN_DJSilicone-NE-8161.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| With better tensile strength, elongation and tear strength than common and general silion rubber, high-strength silicone rubber for molding is suitable for molding products with higher mechanical property requirements. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 to 1.23 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 58 to 62 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | < 10 | % | ASTM D412 |
| Tensile Strength (Yield) | > 8.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 420 | % | ASTM D412 |
| Tear Strength | > 24.0 | kN/m | ASTM D624 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAISOX 3214 | Formosa Plastics Corporation | LLDPE | TAISOX |
| FHR EPS R-MER II® 5627 (1.25 lb/ft³) | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| Grivory® HT XE 3996 | EMS-GRIVORY | Nylon 10T/X | Grivory® |
| Jiangsu Sinarise EX7504X | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
| PROXESS 1806S3 | Braskem | LLDPE | PROXESS |