Order Products : sales@su-jiao.com
ALKAMIX™ MB6009
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | ALKAMIX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C7d4FG_ALKAMIX-MB6009.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALKAMIX MB6009 is formulated with an antiblock additive at a concentration of 15 percent. ALKAMIX MB6009 can be added to polythene during extrusion to reduce the blocking tendency of film, particularly where minimum blocking tendency is required. The level required may vary according to desired properties, however the recommended addition level is between 1 to 3 percent. The maximum level of addition of ALKAMIX MB6009 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 6.5 percent, when added to a polyethylene formulation free of any antiblock additives. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.980 | g/cm³ | ASTM D1505 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2299 X 125404 A | RTP Company | PEEK | RTP |
| Medalist® MD-230 | Teknor Apex Company | TPE | Medalist® |
| Sylvin 9067F6 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Ablefilm 570K | Henkel Ablestik | Epoxy | Ablefilm |
| Iupiace® GH30 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
