Order Products : sales@su-jiao.com
Generic Nylon 66 - Glass Fabric
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C7Gn9G_Generic-Nylon-66---Glass-Fabric.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 66 - Glass Fabric This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.22 - 1.56 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strain (Break, 23°C) | 2.5 - 3.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 4500 - 12000 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 5.1 - 16 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 255 - 260 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 235 - 250 | °C | ISO 75-2/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 95.0 | °C | |
| Drying Time | 3.0 - 5.0 | hr | |
| Processing (Melt) Temp | 245 - 293 | °C | |
| Mold Temperature | 74.2 - 85.2 | °C | |
| Injection Pressure | 8.00 - 57.2 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 66 - Glass FabricThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VENYL UG370 | AD majoris | Nylon 66 | VENYL |
| NEFTEKHIM PP 9240P | Nizhnekamskneftekhim Inc. | PP Copolymer | NEFTEKHIM PP |
| Gallonprene® GP520-4501 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Kingfa MAC-701 | Kingfa | PC+ABS | Kingfa |
| ISPLEN® PM 281 EV | REPSOL | PP Copolymer | ISPLEN® |
