Order Products : sales@su-jiao.com
Xuchuan 2250W/B-8580
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Xuchuan Chemical (Suzhou) Co., Ltd |
| Trademark: | Xuchuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C79wuc_Xuchuan-2250W-B-8580.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Xuchuan 2250W/B-8580 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.300 to 0.450 | g/cm³ | |
| Density | |||
| A-2250W : 40°C | 1.010 to 1.020 | g/cm³ | |
| B-8580 : 40°C | 1.080 to 1.200 | g/cm³ | |
| Viscosity | |||
| A-2250W : 40°C | 0.800 to 1.20 | Pa·s | |
| B-8580 : 40°C | 0.600 to 0.800 | Pa·s |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Ross Flex (23°C) 1 | No Crack |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Cream Time | 6.0 to 8.0 | sec | |
| End of Rise Time | 40.0 to 50.0 | sec |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Free Rise Foam Density | 150 to 250 | kg/m³ | |
| Preheat Temperature | |||
| Part A | 50 to 60 | °C | |
| Part B | 50 to 60 | °C | |
| Preheat Time | |||
| Part A | 8.0 to 10.0 | hr | |
| Part B | 8.0 to 12.0 | hr | |
| Processing Temperature | |||
| Part A | 40 to 45 | °C | |
| Part B | 38 to 42 | °C |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 37 to 55 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Break) | 4.00 to 6.00 | MPa | |
| Tensile Elongation (Break) | 250 to 400 | % | |
| Tear Strength | 18.0 to 26.0 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 78 to 80 | ||
| Demold Time | 4.0 to 5.0 | min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 45.0 to 55.0 | °C |
| Note Message | |
|---|---|
| 1 . | 40000 cycles |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Texin® 4210 | Covestro - PUR | PC+TPU | Texin® |
| WanBlend® WHT-HF9175 | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | WanBlend® |
| Yanshan PS 680X | SINOPEC Beijing Yanshan Petrochemical | PS (GPPS) | Yanshan PS |
| ETILINAS HD5740UA | POLYETHYLENE MALAYSIA SDN BHD | HDPE | ETILINAS |
| Ecomann® PHA EM50010 | Shenzhen Ecomann Biotechnology Co., Ltd. | PHA | Ecomann® |
